AML PART-66 BASIC PRACTICAL EXPERIENCE LOGBOOK

AML PART-66 BASIC PRACTICAL EXPERIENCE LOGBOOK

FOREWORD

This logbook has been developed in its current format as the preferred means of recording aircraft practical maintenance training and experience in order to support an application to the authority for the issue of an initial Aircraft Maintenance Licence (AML) or for the extension of the Aircraft Maintenance Licence.

The format and layout of the logbook is designed to enable a methodical and progressive recording of ongoing work experience by the user, thereby enabling a quicker and more accurate assessment of the user’s technical knowledge and experience by the competent authority (DAC), maintenance organisation.

Used correctly, this logbook will serve as a compact and portable reference document, which will hold a concise history of the holder’s training, experience and qualification, together with a facility to record any ongoing work experience as it is required for the purpose of applying to the competent authority for the issue of an initial Aircraft Maintenance Licence.

The design and content of this logbook have been derived from current regulatory requirements. However, please note that completion of this logbook does not preclude the need to produce original documents, such as employment references, training certificates or certified true copies of the same, where these may be required.

INSTRUCTIONS FOR USE

All entries in this logbook must be made with ink ball pens in blue or black only.

All items defined into the logbook per ATA must be carried out. For any deviation a justification is required.

Dates entered must follow the format ddmmyy.

Each page must be identified by the logbook owner’s name, stamp and signature (company authorization number if no stamp available).

As the logbook is used in support to an application for an Aircraft Maintenance Licence (initial or extension), any false entry will constitute an offence under the legislation currently in force.

COMPLETION OF THE LOGBOOK

It is the responsibility of the logbook holder to ensure using the current version of the logbook (available through the DAC website) before starting to record the tasks, qualifications and experience as necessary and overall to maintain the logbook in a clear and accurate manner. It is important to note that the logbook holders are not qualified thus not allowed to certify their own entries.

The supervisor(s) must be ultimately designated by their company to carry out the supervision of maintenance acts and evaluations/recommendations.

This/these is/are defined in the company internal procedure, approved via the Maintenance Organisation Exposition by the Direction de l’Aviation Civile Luxembourg.

The supervisor(s) should be proficient and have sufficient experience, knowledge in human performance and safety culture, the aircraft type, training, coaching, testing skills, instructional tools to use and understand the objective and the content of the practical elements of the training that is being assessed and that the competence and qualification criteria to the company’s procedures are met.

Examples of performance tasks

tasks performed on the aircraft(s) can also be signed off by the mechanics, which has at least an AML and is closely working with the apprentice.

tasks performed in the shops can be signed off by the authorized shop inspector.

The tasks to be signed off by the instructor of the Lycée Privé Emile Metz are marked as:	(but not limited to)

It is a private logbook and kept by the apprentice but reviewed by many different persons (maintenance organisation, DAC etc.).

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
PERSONAL DATA OF THE APPRENTICE
This is a private logbook and kept by the apprentice but reviewed by many different persons (instructors, assessors, DAC etc.). The personal data records have to be handled with the highest confidential level possible, due to the newly implemented EU regulation. The General Data Protection Regulation (GDPR) (EU) 2016/679 became directly applicable in all member states on the 25 May 2018
Name:	Forename:
Employee ID:	Date of birth:
Nationality/ies:	Place of birth:
Permanent address of residence:	1) New permanent address of residence:
2) New permanent address of residence:
3) New permanent address of residence:
Logbook Owner's Name: Owner's Stamp: Owner's Signature:

EVALUATIONS / RECOMMENDATIONS FROM THE SUPERVISOR
SUPERVISOR’S STAMP, SIGNATURE AND DATE
SUPERVISOR’S STAMP, SIGNATURE AND DATE
SUPERVISOR’S STAMP, SIGNATURE AND DATE
SUPERVISOR’S STAMP, SIGNATURE AND DATE
SUPERVISOR’S STAMP, SIGNATURE AND DATE

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Safety Precautions, Workshop Practices and Tools (M7.1 - 7.3)
1	Explain hazards when working with aircraft related to noise, heat, moving surfaces, propellers, rotors, intakes and exhausts.
2	Demonstrate safety precautions when using fluids, gasses and chemicals.
3	Apply and explain workshop environment related safety practices
4	Define proper care and control of tools and equipment.
5	Check validity of calibration of tools and equipment.
6	Demonstrate inspection technic using a mirror and a light source.
7	Use tools and equipment for cutting, forming and joining commonly used materials. (Ferrous and non-ferrous)
8	Demonstrate correct use of measuring equipment like micrometers, verniers and height gauges.
9	Use a torque meter with and without extension.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Avionic General Test Equipment (M7.4)
10	Explain the operation of a typical avionic test equipment.
11	Use test meters to measure volts, amps and resistance in practical task circumstances.
12	Check an aircraft electrical circuit for continuity in conjunction with an electrical wiring diagram.
13	Carry out basic fault-finding techniques using a range of test meters.
14	Carry out bonding and insulation tests.
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Engineering Drawings, Fits and Clearances (M7.5 - 7.6)
15	Interpret and work to engineering drawings.
16	Demonstrate correct reading and interpretation of electrical wiring diagrams.
17	Drill and ream perpendicular holes in non-ferrous material.
18	Demonstrate/explain use of feeler, slip, limit, go/no go gauges.
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Electrical Cables and Connectors (M7.7)
19	Demonstrate wire splicing methodes.
20	Identify a range of electrical component symbols.
21	Identify cables and cable values by reference to the standard wiring practices manual.
22	Inspect electrical cable looms and bundles.
23	Inspect of cable feed-throughs.
24	Install wiring clamps.
25	Interpret typical electrical wiring diagrams and schematics circuits.
26	Prepare and install a simple loom, using at least two binding methods.
27	Repair or replace an electrical connector.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Electrical Cables and Connectors (M7.7) - Cont’d
28	Select and use appropriate cable stripping tools.
29	Use two crimping systems to prepare cable ends or plug/socket terminals.
30	Insert/extract electrical inserts (pins) in a variety of electrical connectors.
31	Inspect coaxial cable installations.
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Riveting (M7.8)
32	Use hand & power tools to drill rivet holes as instructed by Structure Repair Manual.
33	Identify a range of solid and blind rivets and fasteners.
34	Identify, select and use a range of rivet setting equipment.
35	Set a range of raised and countersunk rivets in aluminium sheet using various methods.
36	Identify faulty rivet settings.
37	Remove defective rivets without causing further damage to skin.
38	Select and install oversize rivets as instructed by Structure Repair Manual.
39	Set a range of different fasteners in aluminium sheet.
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Pipes, Hoses, Springs, Bearings, Transmissions and Control Cables (M7.9 - 7.13)
40	Remove & replace a flexible hose including clips and brackets.
41	Remove & replace a rigid pipe, including clips and brackets.
42	Locate components using referencing system, like station numbers.
43	Explain methods for inspection and testing of springs.
44	Explain methods of testing, cleaning and inspection of bearings.
45	Explain where lubrication requirements are stored.
46	Inspect screw jacks, levers, push-pull rod, belts, pulleys, chain and sprocket.
47	Inspect gears.
48	Inspect and assess condition of Bowden cables/flexible control cables. (flex ball cables)
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Material Handling, Welding, Brazing, Soldering and Bonding (M7.14 - 7.15)
49	Use hand tools, folding and bending machines to shape aluminium alloy as instructed by Structure Repair Manual.
50	Bend metal to a bend radius and angles as given in the engineering drawing.
51	Demonstrate removal of corrosion/reprotection on aluminium sheet.
52	Cut and shape material to required profile, using approved procedures.
53	Identify the characteristics and properties of common composite materials.
54	Identify a range of sealing and bonding agents.
55	Explain methods to detect defects/deterioration in composite materials.
56	Perform a small repair of a composite structure.
57	Explain bonding methods, inspection of bounded joints.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Aircraft Weight and Balance, Handling and Storage (M7.16 - 7.17)
58	Explain/Simulate the preparation of aircraft for weighing
59	Assist jacking aircraft.
60	Park, chock and ground aircraft.
61	Assist in the towing of an aircraft.
62	Assist in servicing of toilet and potable water system. (if installed)
63	Carry out/assist refueling of aircraft.
64	Check & replenish oil and hydraulic systems.
65	Perform lubrication of bearings. (flight controls/landing gear)
66	Remove and refit aircraft access panels.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Aircraft Weight and Balance, Handling and Storage (M7.16 -7.17) - Cont’d
67	Connect and use external air supply. (if adapter installed)
68	Connect and use external power.
69	Check/adjust tire pressures
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Disassembly, Inspection, Repair & Assembly Technic. Abnormal Events, Maintenance Procedures (M7.18-7.20)
70	Explain the procedures for material storage and handling.
71	Adjust, set and use torque spanners.
72	Identify standards and specifications of common used parts like nuts, bolts, washers and split pins.
73	Replace a range of common components like split pins, tabs, spring and plain washers, plain and lock nuts.
74	Identify part numbers from a component overhaul manual or IPC.
75	Demonstrate competence when wire locking a variety of assemblies.
76	Measure shaft, bores, flanges, and adjacent surfaces using precision measuring instruments.
77	Demonstrate application of two-component sealers and compounds.
78	Demonstrate disconnecting and reconnecting of electrical connectors.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Disassembly, Inspection, Repair & Assembly Technic. Abnormal Events, Maintenance Procedures (M7.18-7.20) - Cont’d
79	Explain & implement electro static discharge procedures.
80	Demonstrate replacement of circuit breakers
81	Replace internal and external lamps/bulbs.
82	Replace static discharge wick.
83	Perform or assist on non-destructive inspections like HFEC, boroscope.
84	Assist proficiency in troubleshooting using FIM and onboard reporting systems.
85	Perform pre-flight check/MBC check.
86	Assist and explain a scheduled check. (MBC or A-Check)
87	Suppose a hard or overweight landing: Show unscheduled inspection procedure according AMM and explain action.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Disassembly, Inspection, Repair & Assembly Technic. Abnormal Events, Maintenance Procedures (M7.18-7.20) - Cont’d
88	Explain the required inspection following a lightning strike or static discharge.
89	Demonstrate close-up of documentation following performance of maintenance tasks.
_ _
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Airplane, Electric Aircraft Systems and Avionics (M11 – 12 & 13)
90	Perform replacement of a LRU.
91	Inspect cabin/cockpit equipment for serviceability.
92	Run a functional check on flap load relief.
93	Imagine a faulty flight control system: Use the on-board test equipment for troubleshooting. (CMC)
94	Assist or explain replacement of seals on a landing gear shock strut.
95	Prepare airplane for landing gear retraction/extension test.
96	Perform functional test of anti-skid system.
97	Replace O2 cylinder.
98	Prepare airplane and environment for APU start.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Airplane, Electric Aircraft Systems and Avionics (M11 – 12 & 13) - Cont’d
99	Replenish potable water system.
100	Inspect toilet and galley units for serviceability.
101	Check operation of air conditioning system.
102	Conduct Aircraft battery check.
103	Remove/refit main or APU batterie.
104	Replace any electrical component and run a functional test i.a.w. AMM.
105	Replace a crew or passenger seat.
106	Check seatbelts for serviceability.
107	Check condition and function of emergency equipment.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Airplane, Electric Aircraft Systems and Avionics (M11 – 12 & 13) - Cont’d
108	Check ELT for compliance with regulations.
109	Perform weight check on fire extinguisher container and replace if necessary.
110	Inspect and test fire detection system.
111	Explain precautions and safety measures required before operating flight controls.
112	Perform rigging of flight controls following component replacement.
113	Explain replacement procedure for a hydraulic flight control actuator.
114	Determine aircraft airworthiness per MEL/CDL.
115	Run a functional check on hydraulically operated flight control systems.
116	Replace and test a fuel boost pump.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Airplane, Electric Aircraft Systems and Avionics (M11 – 12 & 13) - Cont’d
117	Replace a hydraulic system component according to AMM.
118	Explain replacement/installation of hydraulic pump. (electrical or engine driven)
119	Inspect hydraulic reservoir, replenish fluid and recharge reservoir if required.
120	Check function of anti-ice or de-icing system.
121	Remove and refit windshield wiper blades
122	Replace landing gear wheel assy.
123	Remove and install main landing gear brake assy.
124	Bleed hydraulic brakes.
125	Assess shock strut fluid level and recharge if required.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Airplane, Electric Aircraft Systems and Avionics (M11 – 12 & 13) - Cont’d
126	Retrieve data from central maintenance computer.
127	Demonstrate the procedure for a structural inspection. (from nose to tail)
128	Check door seals and replace them, if required.
129	Explain or perform flight deck window cleaning.
130	Remove/install flight deck or cabin window.
131	Carry out an auto throttle system test.
132	Demonstrate BITE test practices on flight management system.
133	Perform an autopilot system test.
134	Replace an LRU related to air data system and perform associated Bite test.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Airplane, Electric Aircraft Systems and Avionics (M11 – 12 & 13) - Cont’d
135	Assist to a VHF radio check.
136	Describe a typical antenna replacement procedure.
137	Perform an intercom or passenger address component replacement and testing.
138	Conduct generator power check.
139	Perform a fuel quantity indicating system test.
140	Discuss maintenance practices on EFIS.
141	Identify flight data and voice recorder system.
142	Run BITE tests on selected navigation systems like ADF, LOC/GS, Marker, DME, Radio altimeter, TCAS, GPWS.
143	Discuss weather radar component replacement and functional test.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Airplane, Electric Aircraft Systems and Avionics (M11 – 12 & 13) - Cont’d
144	Assist calibration check of a pitot static system using a leak tester.
145	Check operation of on-board maintenance system. (CMC)
_ _
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Helicopter only (M12)
146	Demonstrate mooring and picketing.
147	Secure rotor blades.
148	Assist removal of tail rotor.
149	Perform tail rotor flight control rigging.
150	Assist in removal/refit main rotor head or gear box.
151	Perform main rotor flight control rigging.
152	Check main rotor track and balance.
153	Assist in removal/refit transmission drive shaft.
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Gas Turbine Engine (M14 & 15)
154	Assist in engine boroscope.
155	Assist in an engine removal & installation.
156	Assist in engine idle or high-power run.
157	Check engine oil level and refill to correct level if required.
158	Assist FADEC system test.
159	Assist an engine fuel injection system test. (wet motoring)
160	Assist engine ignition system test.
161	Replace engine ignitor plug and check function.
162	Assist engine indication system functional tests.
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Gas Turbine Engine (M14 & 15) - Cont’d
163	Assist in replacement of starter motor or starter valve.
164	Demonstrate replacement of thermocouple/temperature sensor.
165	Assist replacement of temperature, pressure or flow indication components.
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Propeller (M17)
166	Retorque Propeller after Blade change (except Bombardier Task 61−10−01−400−802)
167	Assist in propeller static balancing.
168	Check propeller de-icing system and components
169	Explain theory of propeller synchronising procedure with synchrophasing equipment.
170	Perform propeller lubrication
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Other Tasks
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Other Tasks - Cont’d
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Other Tasks - Cont’d
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Other Tasks - Cont’d
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Other Tasks - Cont’d
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Other Tasks - Cont’d
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature

AML PART-66 APPRENTICE BASIC PRACTICAL EXPERIENCE LOGBOOK
Index No.	ATA + Subchapter	Task/Competence Relevant Category to be marked with x	A	B1	B2	A/C regis. or W/O or Workshop	Owner's stamp and signature	Supervisor's stamp and signature	Date (ddmmyy)
Other Tasks - Cont’d
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
_ _
Logbook Owner’s name: Owner’s stamp: Owner’s signature